Why do weeds grow between pavers?
Joints collect wind-blown seeds, dust, leaves and grass clippings. As that debris breaks down, it becomes a thin layer of soil that holds water. In Miami's warm, wet climate, that is all a weed needs. Joints that have lost sand, or were filled with ordinary sand, are the most vulnerable.
How does polymeric sand stop weeds?
Polymeric sand is fine sand mixed with binders. It is swept into the joints dry, compacted, and then misted with water, which activates the binder so it sets firm. The firm joint:
- Leaves little room for seeds to root
- Resists washout from heavy rain
- Helps keep insects such as ants from digging
- Helps lock the pavers together
It has to be installed correctly: pavers clean and dry, joints filled to the right depth, excess swept off the surface before wetting, and no heavy rain while it sets. Done wrong, it can leave a haze on the pavers or stay soft.
Does landscape fabric under pavers stop weeds?
Fabric can separate soil from the base in some situations, but it does little for weeds in the joints, because those weeds root in debris on top, not in the soil below. A well-compacted aggregate base and filled, stabilized joints matter more.
How do I remove weeds that are already growing?
- Pull by hand when the ground is damp, gripping at the base so the root comes out. A narrow weeding tool or old screwdriver helps.
- Pour boiling water on weeds in the joints. It kills young weeds without chemicals.
- Use a weed killer labeled for hardscapes if needed, following the label exactly. Some products can stain pavers or harm nearby plants and lawns.
- Clean out the joint once the weed is gone, then refill with sand.
A note on homemade vinegar and salt mixes: salt can damage pavers and nearby soil and plants, so avoid it near lawns and gardens.
What mistakes let weeds come back?
| Mistake | Why it causes weeds | Fix |
|---|---|---|
| Ordinary play sand in joints | Washes out and holds debris | Use polymeric or jointing sand made for pavers |
| Pressure washing without resanding | Blasts sand out of the joints | Refill joints right after washing |
| Letting leaves sit on the driveway | Debris composts in the joints | Sweep or blow off regularly |
| Ignoring small weeds | Roots spread and can lift pavers | Pull them early |
| Low spots and standing water | Wet joints grow weeds and algae | Fix drainage or reset sunken pavers |
How should I maintain pavers to keep weeds away?
- Often: sweep or blow off leaves and debris.
- Regularly: check joints for low sand and pull any new weeds.
- After pressure washing: refill the joints.
- When water stops beading: reseal. A joint-stabilizing sealer helps hold the sand. See why sealing matters in Florida.
When should I call a professional?
Call when weeds or roots are lifting pavers, several pavers are loose or sunken, water pools on the surface, or the joints need a full clean-out and resanding. Those are signs of a base or drainage problem, not just weeds.
Thinking about new pavers?
A well-built paver driveway, with a compacted base, edge restraints and stabilized joints, is the best weed prevention there is. MiamiCrete (license CGC1529269) installs paver driveways in Miami. Request a free written quote or call (305) 790-4850.
Frequently Asked Questions
What is the best way to stop weeds between pavers?
Fill the joints with polymeric sand, keep them full, sweep debris off regularly and reseal the surface when needed.
Does polymeric sand really stop weeds?
It greatly reduces them by leaving a firm joint with no loose soil for seeds. Weeds can still sprout in debris that collects on top, so regular sweeping still matters.
Is it safe to use vinegar and salt on pavers?
Salt can damage pavers, soil and nearby plants. Boiling water or a weed killer labeled for hardscapes, used as directed, are safer choices.
Should I resand pavers after pressure washing?
Yes. Pressure washing removes joint sand, and empty joints are where weeds start.
Why are weeds lifting my pavers?
Roots growing in the joints or under the pavers can lift them, especially where the base is weak or water collects. Have the area reset and the joints restabilized.

